Survival Unlimited.com
  
1-800-455-2201,  (225) 647-8192,   (225) 647-2171,
Net Hours: Mon-Fri 10:00 am - 5:00 pm Central Time    Contact and Address

EAGLE WIND TURBINE
MOUNTING BRACKET  &  TAIL SECTION

EAGLE TURBINES      TURBINE BLADES
PMA's <Std. Series>      SUPER CORE PMA's


Build Your Own Wind Turbines with Eagle Parts
Using our Blade Sets & Mounting Brackets

Universal Alternator /PMA Mounting Bracket Kit

Fits any alternator or PMA - Adjustable slots can travel to fit most alternator mounting bolt centers from 5.5" to 7.75" - Fits most Delco, Ford and big truck type alternators. Can accommodate alternators or PMAs with up to 9" bolt hole center spans if bracket is welded together. Bracket has over 12 mounting holes on the back side to accommodate any tails or wiring mounts.

 

PMA Bracket - Shown painted already


WTM15 series (2-Piece Mount)
These brackets are bare metal and require painting
PMA, tail and pole not included (Un-painted)
$119.95/set   #WTM15

 

Kit includes:

  • Two piece staggered brackets (A & B)
  • Special locknuts that can never vibrate loose.
  • Two bracket bolts with Nylon lock nuts.
  • Two 1.5" pipe locks so bracket can swivel on mast.
  • Wire lock, hanger and mounting hardware.
  • Adjustable slots can fit 5.5" to 7.75" bolt centers.
  • Spacers plus two long bolts (If you are not using our PMA may require custom fitting)

#WTMB1- One piece fixed bracket kit. Fits on many Delco models.
(These brackets are bare metal and require painting)
$109.95 Mounting Kit ONLY (No tail)

 

Includes:
•Fixed bracket for PMA's with 6 5/8" bolt centers.
•Fits Delco 10si, 12si and many other "si" models.
•Special locknuts that can never vibrate loose.
•Two 1.5" pipe locks so bracket can swivel on mast.
•Wire lock, hanger and mounting hardware (not shown)

Includes spacers and bolts at fit our "SC" and "SCS" series PMA's and many other Delco models.

This kits above are only recommended for turbines that have a 72" blade diameter or less and have a total blade weight of under 84 ounces. Blades must be perfectly balanced!)
NOTE: Not for use with pulleys, belts or any other side loads. This bracket is to be used for in-line thrusts only

No Slip Rings - Our advice on slip rings is to use heavy rubber cable and don't worry about twisted wire. Twisted wires in the pole are an overrated problem in small wind turbines. Heavy rubber wires tend to simply unwind when they are under tension and the head favorers turning in the opposite direction to effect unwinding. In all manufacturing testing slip rings eventually failed and required maintenance while over 100 small test turbines equipped with rubber welding cabal operated with exceptional dependability for over 12 years now and counting.


Eagle Tail Section Assembly (Tail Bar & Tail Fins)
* Mounts onto Altenator Bracket seen above (Un-painted)

$109.95  #HTTK

 

Eagle Tail Bar Only
$59.95
 #HTTB

 

Eagle Tail Fins Only
$59.95
 #HTT

 

 

EAGLE WIND TURBINES
EAGLE WIND TURBINE BLADES
PMA'S - PERMENANT MAGNET ALTENATORS - Std. Series
SUPER CORE PMA's

HOME