CAN ALSO BE USED TO PUMP WATER OR OTHER LIQUIDS FROM A 55 GALLON DRUM.
rugged, cost-efficient Ultimate hand-lift pump combines all the advantaged of
the old fashioned cast iron pump with modern technology. Made of Reinforced Engineering
Thermoplastics, the Ultimate pump is virtually unbreakable, lightweight and will
not rust, corrode or wear. Test show no wear of the cylinder or plunger cup after
millions of strokes.
Closed design prevents entry of air-borne
and other potential contaminants, an important consideration for a sanitary water
It is ideal for monitoring wells; test wells; as a
bilge pump; as a transfer pump or any general purpose pumping application. It
will pump most any liquid, and is very useful any place where water has to be
carried, pumped or hauled.
The Ultimate pumps are used primarily on wells,
cisterns, springs, buried tanks, rivers or streams where maximum lift (distance
to water) does not exceed 30 feet (9 meters).
With its lightweight, sturdy
construction the our Ultimate pumps are ideal for campsites, summer homes, stock
water, rural dwellings, parks, picnic areas, plant nurseries, villages or remote
1 1/2 in slip connection. Suction (drop pipe) 2 in. to 1 1/4 in. Height
18 in. .Weight 4 pounds. Diameter 3 1/2 in. (3 in. I.D. cylinder). .Resistant
to salt water, most chemicals. .Up to 10 gallons per
minute, or 5 gallons per minute noramal pumping. Maximum Lift (distance
to water) 20 ft. For every 1000 feet above sea level, you loose 1' of depth capacity.
So if you were 5000' above sea level you would only be able to pull water from
N0. UPP2 - with pressure capability. Will plumb directly
to standard PVC pipe (solvent weld) or adapt to hose, etc. 0-20lbs. normal operating
pressure, up to 50 ft. head.
Solar models will be available in the future!
THIS MODERN DURABLE PUMP
With a new plunger of our own design and other
patented features, you can produce 1/3 more volume than a conventional hand pump
the same size.
The new cup molded from a Polyester Elastomer will not wear,
distort or dry out and is bacterial inert, resistant to rot, mildew, corrosion,
salt water and most chemicals.
This new cup may be used as a replacement
item on any standard NO. 2-3 in. plunger.
pumps weight per volume factor is unmatched. A 4lb. shipping weight compared to
17lb. plus on cast iron...consider the freight savings. This makes our pump easy
to transport to another location!
WARRANTY: Warranted at retail for a period of ONE YEAR against defects in
material or workmanship. Submit proof of purchase and transportation cost and
manufacturer will repair or replace the item at their option, no charge. They
will also repair or replace pumps for 25% (1/4) of the current retail price plus
transportation costs. Return to Mfg. with proof of purchase, installation date,
failure date and description of defect.
Mfg. will not be liable
for damage or wear to products caused by abnormal operating conditions accident,
freezing, abuse, misuse, unauthorized alteration or repair, or if the product
was not installed in a proper manner. (Pumping sandy water will void the warranty
- use foot valve in this case but remove check valve on pump)
will not be liable for any incidental or consequential damages, losses or expenses
arising from installation use, or any other causes. There are no express or implied
warrants including merchantability or fitness for a particular purpose which extend
beyond those warranties described or referred to above.