OPERATING INSTRUCTIONS

SAFETY TIPS

PETROMAX PARTS

HISTORY

FREQUENTLY ASKED QUESTIONS

TROUBLE SHOOTING

Multi Fuel Petromax Lantern
Shown is the 150CP Polished Brass, 500CP also Available
Reflector not included
100 Watts of Light, 150 Candle Power

See Pricing Below
Also Available in Nickel Plated Brass - See picture above
This Lantern burns a minimum of 20 hours on one tankfull (1-Pint) of kerosene! Great when fuel is hard to get. It also burns a variety of fuels just like the larger 500CP. Get our alcohol kit for safe indoor use. Instructional Video Included
11-3/4" Tall x 5" Wide at base,
Reflector weight: 3 Lbs

Multi Fuel Petromax Lantern
(OURS ARE NOT THE FAKE KNOCK OFFS - THESE ARE THE REAL DEAL MULTI-FUEL LANTERNS. BE CAREFUL OF OTHERS, These are rated Safest in Consumer Reports!)
Nickel #500CP   No Reflector (5 lbs)
400 Watts of light, 500 Candle Power
8-12 Hours burn time Per Tank full (quart) of Kerosene.
New Protection Plate and Instructional Video included.
16" Tall x 6-3/4" Wide at base, Reflector Diameter:  13-3/4" Diameter
See Pricing Below
"PETROMAX" lanterns were designed and developed by Adolf & Max Graetz, who were appointed managing directors of their family business (Ehrich & Graetz) in 1889.  From their efforts arose the most powerful & reliable lanterns in the world. These lanterns now have the distinction of being the safest lantern in the world by "Consumer Reports".  Petromax lanterns run on a variety of fuels - kerosene, alcohol-based fuels, mineral spirits, citronella oil, gasoline, diesel oil, vegetable oil & almost every flammable fuel available on the market which make this lantern #1 for Emergency Preparedness.

Available in Polished Brass - Picture

SEE OUR NEW STAINLESS STEEL NOZZLE
A MUST HAVE

Spare parts kit included at no extra charge with every Lantern!: (500CP & 150CP)

1 - #68 - Needle
1 - #119 - Key for needle
1 - #11 - Rubber washer for filler gauge
1 - #180 - Cleaning needle for preheater
1 - Factory manual
1 - #50 - Nipple for upper vaporizer
1 - #66 - Spanner Wrench
1 - #165 - Funnel
1 - #67 - Alcohol tray filling bottle
3 - Mantles

TOP REFLECTOR (Shown on Lantern Pictured Above)
500cp-2 lbs, 150cp-1 lb. Nickel Plated Brass, Polished Brass, Matte Finish Brass
$ 33.00
Matte Finish - Out of stock

 

SIZE	500 CP Nickel Plated 500 CP Polished Brass 500 CP Matte Finish 150 CP Nickel Plated

Carrying Cases - The lantern and box fit inside.
500 CP & 150 CP
#500CPCC - $ 18.00
#150CPCC - $ 18.00

 

SIZE	500 CP 150 CP

Petromax Heater Adapter
Use with or without the mantle, better without the glass. Comes with protection plate,Unlink others, this way you can just take it out and seconds and reinstall without unscrewing the protection plate which needs to be in the lantern at all times.
Only $29.99

INSTALLATION INSTRUCTIONS
&
More Info !!!

Remove gauge (#149), and insert directly into tank (#118). No need to remove. !!!! Made in the USA !!!!
Prevents deterioration (as per Fitch) of fuel, and eliminates odor. Rejuvenates old/stored fuel, prevents waste.
Basically, just one (1) catalyst should last the lifetime of the lantern (approx. 5,000 hrs of lantern use).

For 500CP, 350CP, 250CP, and 150CP (one size fits all of the Petromax generation lanterns - Aida, Hipolito, Geniol, Petromax, & BriteLyt).

Using the same unit (2-tablet system in nylon mesh, in all three (3) periods of testing:
1. Lantern ran a 10% brighter.
2. Cleaner burn, around the mantle (glass did not fog up or build up).
3. Lantern seems to run longer, even after the first initial start-up (pump-up).
4. Did not have to add pressure to the lantern as often.
5. Lantern seems to run cleaner & no “pulsating” was observed.
6. Fuel Efficiency Increase: 1-Quart of fuel ran 1 - 2 hours longer, than normal (500 cp)
7. Shorter preheating time (approx. 20%).
(On-going test results, will be posted later), and, so far, with positive results.
Overall, I would recommend this product to be used in the lanterns. The testing was based on approx. 3-week periods of testing the lantern, during fishing trips, at 8-hr and 12-hr. intervals. Used fuel catalyst in old fishing lantern, with excellent results. Tested, using gasoline. Kerosene & other oil-fuel testing results will be posted later. If the catalyst is put in the gas gas can, then the fuel put into the lantern (or motorcycle, lawn mower etc) it should be used within 24 hours.

The EZ-Pump™ Valve!
Makes life easy!
#EPV only  $8.99

O-Ring Pump Assembly
500CP lantern tested only 20 pumps to pressurize = 2/3 less pumping! (They are now standard on all new lanterns)
#BOPA      $12.99

O-Ring Pump Replacement (Includes Brass Part) for Leather Pump. Unscrew the leather and screw this on.
#BOPR      $5.00

O-Rings (Rubber O-Ring around brass piece)
#BOR     $0.40

Our new complete pump unit, with O-Ring (Part#6-O Ring) Can be used on all generations of 500cp, 350cp, 250cp, & 150cp: Petromax, Hipolito, Aida, Geniol, BriteLyt. This improvement, replaces the leather version (parts #46 and #45), and gives you better & easier pumping performance.

SuperFlate
Never Hand-Pump a Lantern Again
#SF     $10.00

 

5-Pack of CO2 Cartridges   #CO2  Only  $3.59/5-pk

 

When attached to EZ-Pump valve, this handy item makes it so much simpler, to add pressure to your lantern without pumping, using a CO2 cylinder. Comes with one CO2 Cartridge. It will not over pressurize the tank, there is not enough pressure in the CO2 bottle to do that.

(Works on all Petromax, Aida,Hipolito,and Geniol Lanterns.)

SIDE REFLECTOR
500CP & 150CP, (Shown on the 150CP Lantern)
Polished Brass Also - Picture
$25.00  #500CPSR, #150CPSR, 500PBSR, 150PBSR

 

SIZE & COLOR

500 CP Nickel 500 CP Polished Brass 150 CP Nickel 150 CP Polished Brass

Nickle Plated Brass.  One size fits all.  Will fit any brand lantern. Also available in polished brass.
Size:  5-3/4" Diameter.

EZ-Cook Adapter
(fits on all 500cp. Petromax Lanterns)
AND it is constructed of high-grade stainless steel. 10,000 BTU's

EZ-Cook Adapter also fits older generation lanterns!
(#BEC)    $ OUT OF STOCK

 

Blued & Stainless Steel Nozzle
HIGHLY RECOMMENDED
(#500cpsn)    $23.95 (Sorry, 150cp unit not available yet)

      See Large Pictures!

Makes your lantern burn much BRIGHTER and more FUEL EFFICIENT
New version, all polished stainless steel

THE MILITARY LOVES THESE. It's really a must have because some of our customers break their ceramic ones when replacing mantle by setting the top down too hard onto the floor and they break. So they really are a necessity in any survival situation when a nozzle can't be bought.

Part 500CPSN, Made of Stainless Steel, fits all generations of 500CP and 350CP lanterns. Replaces the ceramic nozzle part number #3. !!! All High Grade Stainless no coating !!!! Polished Stainless !!! No Magnet will stick to this nozzle !!!

Benefits:

• Stronger than standard ceramic #3
  
• Doesn’t loosen up, like regular ceramic piece
  
• Provides shorter pre-heating time
  
• Cleaner mantle-burn with oil-based fuels
  
• A bright burn to the mantle with gas fuels not a yellow look cleans up mantle on all fuels
  
• With EZ-Cook attachment, this stainless nozzle increases cooking performance, especially in higher altitudes. (Tested in High Sierra’s)
  
• increases fuel efficiency of lantern
• VERY BRIGHT, the fule burns more completly and gives off a much brighter light!!!
  US Patented

Glass Globes
#500CPG, #150CPG
$ 11.89
 Estimated Usage 1 per year.

 

SIZE	500 CP 150 CP

PARTS KITS
$ 12.00     #150CPP, #500CPP

 

SIZE	500 CP 150 CP

The parts listed would be the most common needed to repair a lantern should you break or lose apart.  And.....THESE PARTS ARE INTERCHANGEABLE with Aida, Hipolito, Petromax, Geniol,BriteLyt. PARTS HAVE NOT CHANGED IN OVER 80-YEARS

150 CP Isopropyl AlcohoL Conversion KIT
NEW KIT!! Allows you to convert your 150cp lantern, to operate on Isopropyl Alcohol (70% & up) DOES NOT PRODUCE CARBON MONOXIDE WHEN BURNED! EXTREMELY SAFE FOR INDOOR USE - Absolutly the only lantern in the world able to safely be operated Inside your home with this kit !!!!!
$25.00

 

Yes!! That's right!! (used for boo-boos.........first aid) can be used as a fuel!!!! Safe for the environment, as well as your family, low cost, and may just come in handy, if you forgot to buy other types of fuel. With this conversion, you can simply use this part, when you need it, and reconvert your lantern, back to it's original state. Patent pending..Made in the USA

INSTRUCTIONS FOR ADJUSTING THE
150cp & 500cp ALCOHOL KIT/PART

500CP Lantern - Alcohol adjustment instructions, NO KIT NEEDED
You will need part #50ACL
$3.99

BriteLyt Instructional DVD Video
$5.99    #BD

 

Starting instructions,for oil & gas fuel usage, w/breakdown instructions for easy replacement of parts, if needed. Unlike other makes & models of lanterns, all parts of the BriteLyt lanterns can be replaced or repaired. (See close-ups in video).

Video can also be used for refurbishing or replacement of parts on "Aida", "Geniol", "Petromax", and "Hipolito" -- all generations -- of the lanterns, as the parts have not changed in over 80 years.

Photo here shows a clip of the breakdown intructions.

500CP Stainless Steel Protection Plate
(Now comes with all new lanterns)
#500cppp    $ 12.99

 

Stainless/Brass

Stainless Steel Polished Brass

PROTECTS THE LANTERN FROM A BROKEN MANTLE,WITHOUT ENDANGERING THE TANK (#118) AND KEEPS THE TANK COOLER TO THE TOUCH.

Protection Plate for 500CP/829 and 350,826,523,828,Nickel Plated and Military Matte finish lanterns.  Also available in Polished Brass. Petromax,Aida,Geniol,Hipolito,and BriteLyt Lanterns.