#BHA - BriteLyt Heating Adaptor Installation
Process
#BHA PERFORMANCE:
The heater adaptor works best with oil base fuels, such as kerosene,
lamp oil, etc..
BTU's will be higher, distribute more heat,
and lower output of carbon monoxide.
REMEMBER.....Always have some type of ventilation,
when using these products.
BHA and 126-S Heat Shield with screws (below photo)
1. Remove Part #117 (Inner Casing) and #74 - Glass Chimney
2. Place #BHA onto Part #126-S (Heat Shield) see photo below)
3. Try to center hole of #BHA to #3 - Nozzle (see photo below)
4. Bend tabs on #BHA, so each tab is sitting flat onto Heat
Shield.
5. Mark holes onto Heat Shield, (for screws). see photos above)
